C-PLY™, a new structural approach to multiaxials in composites : BI-ANGLE NCFROURE, Thomas.JEC composites. 2011, Num 68, pp 53-54, issn 1639-965X, 2 p.Article

Modeling formability of multiaxial warp knitted fabrics on a hemisphereJINLIAN HU; YAMING JIANG.Composites. Part A, Applied science and manufacturing. 2002, Vol 33, Num 5, pp 725-734, issn 1359-835XArticle

Composites failure criteria and estimation of associated A- and B-basis design allowablesFONG, Jeffrey T.JEC composites. 2012, Num 71, pp 87-90, issn 1639-965X, 4 p.Article

Pre-plied tape : AeronauticsTSAI, Stephen W; KLYOBAYASHI, Yasushi; ISHIDA, Kichiro et al.JEC composites. 2006, Num 24, pp 29-31, issn 1639-965X, 3 p.Article

Drilling of graphite/bismaleimide composite materialRAMULU, M; YOUNG, P; KAO, H et al.Journal of materials engineering and performance. 1999, Vol 8, Num 3, pp 330-338, issn 1059-9495Article

NC2 : an innovative multiaxial NCF reinforcementISLEY, Fred; VILLALON, Esteban.JEC composites. 2006, Num 24, pp 69-72, issn 1639-965X, 4 p.Article

Optimal design of multi-direction composite flywheel rotorsGOWAYED, Yasser; ABEL-HADY, Faissal; FLOWERS, George T et al.Polymer composites. 2002, Vol 23, Num 3, pp 433-441, issn 0272-8397Article

Resin flow analysis in the consolidation of multi-directional laminated compositesWEN-BIN YOUNG.Polymer composites. 1995, Vol 16, Num 3, pp 250-257, issn 0272-8397Article

An energy criterion to predict delayed failure of multi-directional polymer matrix composites based on a non-linear viscoelastic modelRUI MIRANDA GUEDES.Composites. Part A, Applied science and manufacturing. 2004, Vol 35, Num 5, pp 559-571, issn 1359-835X, 13 p.Article

Mode I interlaminar fracture of carbon/epoxy multidirectional laminatesPEREIRA, A. B; DE MORAIS, A. B.Composites science and technology. 2004, Vol 64, Num 13-14, pp 2261-2270, issn 0266-3538, 10 p.Article

The electrical resistance response of continuous carbon fibre composite laminates to mechanical strainANGELIDIS, N; WEI, C. Y; IRVING, P. E et al.Composites. Part A, Applied science and manufacturing. 2004, Vol 35, Num 10, pp 1135-1147, issn 1359-835X, 13 p.Article

Interlaminar fracture toughness of CFRP in Mode I and Mode II determined by Raman spectroscopyMIYAGAWA, H; SATO, C; IKEGAMI, K et al.Composites. Part A, Applied science and manufacturing. 2001, Vol 32, Num 3-4, pp 477-486, issn 1359-835XConference Paper

The fatigue behaviour of filament-wound fiberglass/epoxy tubes under cyclic pressureKUJAWSKI, D; ELLYIN, F; CULEN, M. S et al.Journal of reinforced plastics and composites. 1998, Vol 17, Num 3, pp 268-281, issn 0731-6844Article

On compressive failure of multidirectional fibre-reinforced composites: A fractographic studyTSAMPAS, S. A; GREENHALGH, E. S; ANKERSEN, J et al.Composites. Part A, Applied science and manufacturing. 2012, Vol 43, Num 3, pp 454-468, issn 1359-835X, 15 p.Article

Finite-element investigation of the compressive strength of non-crimp-fabric-based compositesDRAPIER, S; WISNOM, M. R.Composites science and technology. 1999, Vol 59, Num 8, pp 1287-1297, issn 0266-3538Article

On predicting elastic moduli and natural frequencies of multi-phase composites with randomly distributed short fibersCHAO, L.-P; HUANG, Y.-S.Polymer composites. 2000, Vol 21, Num 1, pp 20-27, issn 0272-8397Article

TFC® for reinforcing structures = Le TFC® pour le renforcement des structuresComposites (Paris). 1998, Vol 38, Num 25-26, pp 92-93, issn 0754-0876Article

A study of ultrasonic vibration cutting of carbon fibre reinforced plasticsKIM, J.-D; LEE, E.-S.International journal, advanced manufacturing technology. 1996, Vol 12, Num 2, pp 78-86, issn 0268-3768Article

Carbon composites based on multiaxial multiply stitched preforms. Part 2. KES-F characterisation of the deformability of the preforms at low loadsLOMOV, S. V; VERPOEST, I; BARBURSKI, M et al.Composites. Part A, Applied science and manufacturing. 2003, Vol 34, Num 4, pp 359-370, issn 1359-835X, 12 p.Article

Delamination characteristics of multi-directional carbon fiber/epoxy composites under high pressureKYONG YOP RHEE; HWAN SUP OH; SEUNG HO JANG et al.Polymer composites. 2001, Vol 22, Num 6, pp 793-802, issn 0272-8397Article

Carbon composites based on multiaxial multiply stitched preforms. Part V: Geometry of sheared biaxial fabricsLOENDERSLOOT, R; LOMOV, S. V; AKKERMAN, R et al.Composites. Part A, Applied science and manufacturing. 2006, Vol 37, Num 1, pp 103-113, issn 1359-835X, 11 p.Article

The predictive capability of failure mode concept-based strength criteria for multidirectional laminatesCUNTZE, R. G; FREUND, A.Composites science and technology. 2004, Vol 64, Num 3-4, pp 343-377, issn 0266-3538, 35 p.Article

The predictive capability of failure mode concept-based strength criteria for multi-directional laminates: Part BCUNTZE, R. G.Composites science and technology. 2004, Vol 64, Num 3-4, pp 487-516, issn 0266-3538, 30 p.Article

Fatigue life prediction of laminated polymer matrix compositesHIMMEL, N.International journal of fatigue. 2002, Vol 24, Num 2-4, pp 349-360, issn 0142-1123Conference Paper

Biaxial test results for strength and deformation of a range of E-glass and carbon fibre reinforced composite laminates: failure exercise benchmark dataSODEN, P. D; HINTON, M. J; KADDOUR, A. S et al.Composites science and technology. 2002, Vol 62, Num 12-13, pp 1489-1514, issn 0266-3538Article